Fun and Games > General :: Introductions :: > Industrial electric furnace
Industrial electric furnace - Posted By happywork (happywork) on 24th Jan 18 at 4:40am
1. The design of industrial electric furnace must conform to the relevant technical policies of the state, and the technical performance of the furnace should meet the production process requirements.
2. Measures should be taken to protect the environment and prevent smoke and noise pollution. For the coal furnace, the combustion process should be continuously improved, and the coal gasification combustion instead of laminar combustion should be replaced by mechanical and coal. For cupola should adopt efficient filter instead of gravity precipitator, and then the hot air cupola with dust removal system used to obtain high quality iron liquid, and achieve the goal of dust removal and eliminate harmful gases. For middle and high pressure fans, muffler should be set to reduce noise hazard.
3. The structural dimensions of the industrial furnace shall be determined according to the production practice or scientific test data and shall not be scaled up or reduced in proportion to the original structure.
4. When designing the new furnace structure, new materials and new devices should be used to improve the furnace structure. As far as possible, for example, suitable for the fire characteristics and convenient construction of all kinds of new refractory and heat insulation materials, selection of all sorts of new type burner and waste heat recovery unit, in order to improve the thermal efficiency of the furnace, improve product quality, reduce the fuel consumption, improve the conditions of operation and maintenance and improve the service life of the furnace.Laboratory Single zone Tubular Furnace Up To 1400C with high quality ceramic tube
5. Be familiar with all kinds of furnace with mechanical transmission scheme, familiar with the furnace control principle, innovation the furnace components, such as the oven door, door clamp device, car sand seal, flue gate, all kinds of valves, etc. In order to improve the sealing performance of the furnace.
6. Industrial furnace design, the material selection, equipment selection, size of general components, etc., should as far as possible or the whole workshop general factory in order to make convenient maintenance, especially pay attention to don't choose has been out of products.Tools Carbide Drill Hard Alloy PVD titanium coating machine Chrome vacuum plating machine
7. Within a certain period of time, there are conditions for the three modernizations of certain industrial furnaces: typification, serialization, consummation, design work, timely summarization and promotion of new technologies.
8. Using the thermal and mechanical theory of continuous development, for example, fuel combustion, fluid mechanics, heat transfer, mechanical principle, mechanics of materials, etc., and guide the design of the furnace, introducing and absorbing foreign advanced technology, industrial furnace constantly improve and enhance the technical performance of the furnace and the automation degree of mechanization.vacuum cleaning furnace for clean workpiece used in plastic industry